This page is also available in French. Switch to French

This page is also available in Spanish. Switch to Spanish

Share one circuit between many chargers

EV charger load management without a separate meter: load balancing lets several chargers share one circuit's limited capacity without exceeding it. The split is recalculated continuously as vehicles start and stop charging.

P1 circuitLoad-balancing group · ProportionalSample data
Supply
Algorithm
Star a charger to make it the priority
  • P1-14CA*LKR*E00114*120 A
  • P1-15CA*LKR*E00115*120 A
  • P1-16CA*LKR*E00116*120 A
  • P1-17CA*LKR*E00117*120 A
A group has no fixed maximum number of chargers; the demo shows up to six.

Illustrative interface. Sample data.

What it does

A condo garage: wall chargers share one feed from the electrical panel under a group limit in amps; one is the priority charger.
80A80A 32 ACharging 48 ACharging Charger groupLimit 80 A48A32APriority chargerSecond charger
  • Single- or three-phase groups

    Each load-balancing group is single-phase or three-phase, with a maximum group current. On three-phase groups, the limit applies to each phase.

  • Group limit in amps

    Set the group limit in amps, per phase if needed.

  • Per-charger limits

    Each charger can have its own current limit.

  • Always up to date

    The split is recalculated continuously as vehicles start and stop charging.

  • No separate meter

    Load balancing needs no separate meter.

  • No fixed group size

    A load-balancing group has no fixed maximum number of chargers.

  • On or off per group

    Switch load balancing on or off for each group.

  • If a charger loses its link

    What it does depends on the algorithm. By default, it keeps its last current limit.

Two algorithms

  • Proportional

    Used when no charger has priority. Current is split equally between active sessions, and freed capacity is shared again.

  • Prioritized

    Used when you set a priority charger. It is served first, and the remainder is shared between the others.

  • You choose the priority

    The administrator chooses the priority charger. Only one charger in a group can have priority.

  • Unused capacity is shared

    If the priority charger does not need its full share, the unused capacity goes to the other chargers.

Beyond one circuit

  • Smart charging on grid signals

    Kinethra supports smart charging based on grid signals.

  • V2G and V2H

    Kinethra supports bidirectional charging, V2G and V2H, with compatible chargers and vehicles.

    OCPP in detail

How to set it up

  1. Open the location

    Load-balancing groups are set up for chargers within one location.

  2. Create a group

    Create a load-balancing group for chargers that share one circuit's capacity.

  3. Set phases and current

    Choose single-phase or three-phase, and enter the maximum group current.

  4. Choose a priority charger, or none

    With no priority charger the group uses the proportional algorithm; with one, it uses the prioritized algorithm.

  5. Limit single chargers if needed

    Give any charger its own current limit.

Questions about load management

How does the prioritized algorithm decide?

The administrator chooses one priority charger per group. It is served first, and the remaining current is shared between the other chargers. Capacity it does not need goes to the others.

What happens when a car stops charging?

The split is recalculated continuously as vehicles start and stop charging. With the proportional algorithm, the freed capacity is shared between the sessions that are still active.

What if a charger loses its link to the platform?

It depends on the algorithm. By default, the charger keeps its last current limit.

Do I need a meter?

No. Load balancing needs no separate meter.

How many chargers can share a group?

There is no fixed maximum number of chargers in a group.

Can I set the limit per phase?

Yes. Set the group limit in amps, per phase if needed.

Can charging follow grid signals?

Yes. Kinethra supports smart charging based on grid signals.

Book a demo

What happens next

  1. Tell us about your network.
  2. Meet a Kinethra specialist.
  3. Get your chargers live on Kinethra.
  • 40,000+ chargers onlineOn the Kinethra platform.
  • OCPP 1.6 and 2.0.1Kinethra works with OCPP chargers from any manufacturer.
  • No commission on charging revenueKinethra takes none.
  1. 01Contact
  2. 02Business
  3. 03Request

Step 1 of 3

We use your details to answer your request. See our Privacy Policy for details.