In June, we visited The smarter E Europe in Munich, the energy-industry event whose Power2Drive Europe exhibition covers charging and e-mobility. The three-day exhibition ran from 23 to 25 June 2026 at Messe München. The organizers counted 2,650 exhibitors from 52 countries and about 105,000 trade visitors from 163 countries.

We went as visitors and met charger manufacturers. Some of the standards on show in Munich already appear in US federal funding rules, so they are worth knowing before you buy.

Here is what we saw, and what it means if you sit on a condo board, manage property, own a small charging network or install chargers in the US or Canada.

1. Bidirectional charging was everywhere

What we saw. Bidirectional charging, where the car can send power back to a home (V2H) or to the grid (V2G), was on stands across the show. The organizers run a dedicated area for it, The Bidirectional Zone, and describe the technology as ready for “the transition from pilot projects to widespread rollout.”

What surprised us most was the scale. A lot of companies that had never built chargers before are building them now, and almost all of them showed the charger as part of a bigger ecosystem: the smart home and the wider energy system, not a box on the wall. As Artem put it after the show: “In 2026, a charger can’t just charge. It has to be part of the home and part of the grid.”

What it means for you. In Massachusetts, the MassCEC Vehicle-to-Everything Demonstration gave selected residents, school districts and municipal projects a free bidirectional charger, including installation. Applications are closed, and the demonstration runs through 31 December 2026. Bidirectional chargers also have their own UL safety standard, UL 9741.

Most condo garages do not need V2G chargers today. But a charger you install in 2027 will stay on the wall for years. Ask whether the hardware is ready for bidirectional charging, and choose software that can run it when vehicles and utility programmes catch up. Kinethra supports bidirectional charging (V2G and V2H) with compatible chargers and vehicles.

2. ISO 15118-20 is reaching mass readiness

What we saw. ISO 15118 is the language a car and a charger use to talk to each other. Its second generation, ISO 15118-20, was published in April 2022 and defines the messages for bidirectional power transfer. It also carries Plug & Charge: when both the vehicle and the charger support it, you plug in, the car identifies itself, and the session starts and bills without an app or a card. In Munich, ISO 15118-20 looked ready for volume, not a lab feature. One reason: under EU Delegated Regulation 2025/656, publicly accessible chargers installed or renovated in the EU from 1 January 2027 must support at least ISO 15118-20. Private chargers installed or renovated from 1 January 2027 must also comply with ISO 15118-20 for Mode 3 and Mode 4 charging.

What it means for you. US federal rules already point the same way. Public chargers funded through federal highway programmes such as NEVI must have hardware capable of both ISO 15118-2 and ISO 15118-20. Even if your project uses no federal money, that rule tells you something: ISO 15118 is a hardware question as well as a software one. Ask about it before you buy, because a firmware update may not add it later.

Kinethra supports Plug & Charge (ISO 15118) with compatible chargers and vehicles.

3. Chinese-made chargers under European brands

What we saw. We saw a mass presence of Chinese-made chargers sold under European brands as white-label products.

What it means for you. Building chargers this way is not a problem in itself. But the brand on the box does not tell you who built the hardware, who writes the firmware, or who will fix it in five years.

A model you read about in a European press release may not be ready for a North American site. Ask for the safety listing of the exact model you are buying, from UL or another recognized testing lab.

The same rule that covers ISO 15118 offers a useful test for lock-in. It requires federally funded chargers to switch charging network provider “without any changes to hardware”. Ask for the same thing in your contract, whatever the funding. Our Connect Business software works with OCPP 1.6 and 2.0.1 chargers from any manufacturer.

4. Charging joins the home and the grid

What we saw. Smart homes and smart energy grids were a theme across the show. The organizers’ closing release lists “virtual power plants, smart grid and load control, smart charging solutions, storage technologies and PV hybrid systems” among the products on show.

What it means for you. For a building, a charger is now a load that can be controlled. If your utility runs a managed-charging or demand-response programme, the software behind your chargers needs to follow grid signals. Kinethra supports smart charging based on grid signals.

The protocol layer is moving too. The Open Charge Alliance released OCPP 2.1 in January 2025, with new functional blocks for bidirectional charging and DER control, plus support for ISO 15118-20. The IEC published it as IEC 63584-210 in late 2025. OCPP 2.1 support at Kinethra is in development.

5. What we heard in meetings

Beyond the four trends, three points came up in our meetings with manufacturers.

  • Access to other networks goes through aggregators. Drivers from other networks increasingly reach a charger through aggregator platforms, not through a direct integration between each pair of networks. For a small network, that changes the question from “who do we sign with” to “which platforms can our chargers appear on.”
  • AI is starting to watch charging data. Tools that use AI to flag fraud and unusual patterns in session data are starting to appear. Ask what your provider does with your session data and who sees the alerts.
  • The meter matters if you bill by the kWh. In the US, NIST Handbook 44, Section 3.40 covers electric vehicle fueling systems; NIST publishes its handbooks as model laws for state adoption. In Canada, Measurement Canada sets the rules for Level 1 and Level 2 equipment, and kWh billing currently runs under its temporary dispensation, with conditions. It covers chargers put into service before 1 January 2028, if the owner applies by 31 December 2027. From 1 January 2030, every Level 1 and Level 2 charger that bills by the kWh must be approved and verified by Measurement Canada. If you plan to charge drivers per kWh, ask whether the meter is approved for trade, or covered by Measurement Canada’s dispensation.

What to ask before you buy chargers in 2027

  1. Is the exact model listed for the US or Canada by UL or another recognized testing lab?
  2. Who manufactures it, and who maintains the firmware?
  3. Which OCPP versions does it support today, and is OCPP 2.1 on the plan? Kinethra supports OCPP 1.6 and 2.0.1.
  4. Is the hardware capable of ISO 15118-20, for Plug & Charge and bidirectional charging with vehicles that support them?
  5. Which connector does it use, J1772 or J3400 (NACS), and can it be changed later?
  6. If you bill per kWh, is the meter approved for trade in your state, or accepted by Measurement Canada?
  7. Can you change software provider without replacing the charger?
  8. Can the software follow your utility’s grid signals and programmes?

Planning chargers for 2027?

Munich showed where charging hardware is heading. The decisions that matter for a condo, a property portfolio or a small network are made at purchase: hardware that is ready for the standards coming next, and software you can change.

If Artem could tell a condo board one thing after Munich, it would be this: “Buy chargers with ISO 15118. It matters.”

If you are choosing chargers or software for a building or a network, talk to us. Book a business demo, and we will go through your plans with you.

Sources

  1. Business Wire, 26 Jun 2026 (opens in a new tab) ()
  2. Messe München, The smarter E Europe 2026 (opens in a new tab) ()
  3. Power2Drive Europe, Bidirectional Zone (opens in a new tab) ()
  4. MassCEC, V2X Demonstration (opens in a new tab) ()
  5. UL Solutions, 11 Oct 2023 (opens in a new tab) ()
  6. IEC, ISO 15118-20:2022, 26 Apr 2022 (opens in a new tab) ()
  7. EUR-Lex, Delegated Regulation (EU) 2025/656 (opens in a new tab) ()
  8. eCFR, 23 CFR 680.108 (opens in a new tab) ()
  9. Open Charge Alliance, 23 Jan 2025 (opens in a new tab) ()
  10. Open Charge Alliance, 9 Dec 2025 (opens in a new tab) ()
  11. NIST, EVSE Program (opens in a new tab) ()
  12. NIST, Handbook 44 (2026), Section 3.40 (opens in a new tab) ()
  13. Measurement Canada (opens in a new tab) ()
  14. Measurement Canada (opens in a new tab) ()
  15. Measurement Canada, 2025-09-16 (opens in a new tab) ()

About the authors