This page is also available in French. Switch to French

This page is also available in Spanish. Switch to Spanish

Grizzl-E lights and fault codes

The light on the charger shows its state. A red flashing light with a beeping buzzer means a fault; the number of flashes tells you which one.

Status lights

  • White, steady

    Starting up or processing software.

  • Magenta, steady

    Ready, but not reaching the server.

  • Blue, steady

    Ready and online.

  • Blue, flashing

    Vehicle detected.

  • Green, flashing

    Charging.

  • Green, steady

    Charging complete, stopped by the vehicle.

  • Yellow, steady

    Vehicle not detected; charging restricted by smart features.

  • Yellow, flashing

    Vehicle detected; charging restricted by smart features.

  • Green and yellow, alternating

    Charging not complete; charging restricted by smart features.

  • Red, flashing, with a buzzer

    Fault. Count the flashes; the cycle pauses for 1 second and repeats.

Red flashes and what they mean

  • 1 flash

    Lost ground.

  • 2 flashes

    GFCI high leakage.

  • 3 flashes

    Relay stuck.

  • 4 flashes

    GFCI low leakage.

  • 5 flashes

    High temperature of the module.

  • 7 flashes

    Pilot status E or F (Mini Connect: vehicle communication error).

  • 8 flashes

    Under voltage.

  • 9 flashes

    Diode error.

  • 10 flashes

    Over current.

  • 12 flashes

    Application error.

  • 13 flashes

    GFCI self-test failure.

  • 14 flashes

    Over voltage.

What to do

  • 1. Unplug and count

    Unplug the charging connector from the vehicle and count the red flashes.

  • 2. Power off

    Switch the upstream circuit breaker OFF (Mini Connect: you can also unplug it) and wait 1–2 minutes.

  • 3. Power on and check

    Switch the breaker back ON and check that the fault light is gone.

  • 4. Still there?

    Contact Grizzl-E technical support at +1-833-971-8118 or info@unitedchargers.com, and give the number of red flashes.

When a fault clears by itself

Every error can clear by itself once its cause is gone: the charger then resets automatically.

If the cause remains, the red light stays on.

If an error happens within 5 seconds of starting a charging session, the manuals say a permanent fault is triggered. Follow the steps under What to do.

Grizzl-E Smart: different codes

On Grizzl-E Smart, 6 flashes mean high temperature of the relay, 7 flashes mean pilot state E, and 8 flashes mean pilot state F.

Errors clear automatically within 60 seconds once the cause is gone. The Smart manual has no codes 13 and 14.

Grizzl-E Smart: different light wording

On Grizzl-E Smart, steady white means initialization, steady green means charging complete or no current used by the car, and steady yellow means charging is restricted by limits.

Sources

  1. United Chargers (2026). Grizzl-E Classic Connect 40A Installation Manual, revision 1.2 (opens in a new tab). January 22, 2026: indicator lights and faults pp. 20–21, Wi-Fi pp. 22–26; retrieved 2026-10-22.
  2. United Chargers (2026). Grizzl-E Duo Connect 40A User Guide, revision 1.0 (opens in a new tab). April 7, 2026: indicator lights and faults pp. 6–7, Wi-Fi pp. 9–12, local web page pp. 13–22; retrieved 2026-10-22.
  3. United Chargers (2026). Grizzl-E Mini Connect User Manual, revision 2.0 (opens in a new tab). April 30, 2026: indicator lights and faults pp. 14–15, Wi-Fi pp. 16–17 and 24–29; retrieved 2026-10-22.
  4. United Chargers (2026). Grizzl-E Ultimate Operation Manual, revision 5.0 (opens in a new tab). April 30, 2026: sections 3 (lights and faults), 4 (Wi-Fi), 5.3 (Setup) and 6 (Wi-Fi features); retrieved 2026-10-22.
  5. United Chargers (2025). Grizzl-E Smart Connect User Manual, revision 2.9 (opens in a new tab). units made after July 5, 2023; no printed date (PDF file dated July 25, 2025): sections 7 (lights and faults), 8 (Wi-Fi) and 10 (station Wi-Fi network); retrieved 2026-10-22.