This page is also available in French. Switch to French

This page is also available in Spanish. Switch to Spanish

How to connect a Grizzl-E to Wi-Fi

Grizzl-E chargers go online over Wi-Fi. Check the requirements first, then follow the steps for your model.

What your Wi-Fi needs

  • 2.4 GHz only

    Grizzl-E only joins a 2.4 GHz Wi-Fi network, not 5 GHz. Give the 2.4 GHz band its own network name (SSID).

  • Signal of −67 dBm or better

    The charger needs a signal of −67 dBm or stronger; some manuals give −40 to −60 as the optimal range. Move the router closer, or add a repeater or extender.

  • Password up to 38 characters

    Grizzl-E will not join networks with passwords longer than 38 characters. Special characters in the password may also stop it from joining.

  • Mesh routers

    The Classic Connect, Duo Connect and Ultimate manuals: split the mesh network so the 2.4 GHz band has its own name, or use a guest network on the node nearest the charger. If that does not work, install a 2.4 GHz Wi-Fi extender.

Setup from a web browser (Duo Connect, Mini Connect, Ultimate)

  • 1. Join the charger's network

    On your phone, join the Wi-Fi network named after the charger's serial number. Stay on it even though it has no internet. If you cannot see it: the charger hides its network 15 minutes after power-on, so switch the circuit breaker off and on to bring it back.

  • 2. Open 192.168.4.1

    In a web browser, go to 192.168.4.1. If the page will not load, turn off mobile data.

  • 3. Choose your home network

    Open the Setup tab, then Wi-Fi Connect Configuration. Turn on the Connect button, select Search, pick your network and enter its password.

  • 4. Save and confirm

    Select Save, then Confirm to apply the new settings.

Setup for Grizzl-E Smart

  • 1. Before you start

    Make sure the charger is powered on and not plugged into the vehicle. The light should be magenta: ready, but not on Wi-Fi.

  • 2. Join the charger's network

    Its name is the serial number, for example GRS-170000000123. The password is password.

  • 3. Open 192.168.4.1

    Select Show Available Networks and pick your network. Its signal must be stronger than −67 dBm; if it is weaker, install a Wi-Fi extender.

  • 4. Save and Reboot

    Enter your Wi-Fi password and select Save and Reboot. A blue light means the charger is online; magenta means it did not join.

A note for Ultimate owners

The Ultimate Operation Manual gives two defaults for the charger's own network password: password in its app setup steps, and no password in its Setup page section.

Sources

  1. United Chargers (2026). Grizzl-E Classic Connect 40A Installation Manual, revision 1.2 (opens in a new tab). January 22, 2026: indicator lights and faults pp. 20–21, Wi-Fi pp. 22–26; retrieved 2026-10-22.
  2. United Chargers (2026). Grizzl-E Duo Connect 40A User Guide, revision 1.0 (opens in a new tab). April 7, 2026: indicator lights and faults pp. 6–7, Wi-Fi pp. 9–12, local web page pp. 13–22; retrieved 2026-10-22.
  3. United Chargers (2026). Grizzl-E Mini Connect User Manual, revision 2.0 (opens in a new tab). April 30, 2026: indicator lights and faults pp. 14–15, Wi-Fi pp. 16–17 and 24–29; retrieved 2026-10-22.
  4. United Chargers (2026). Grizzl-E Ultimate Operation Manual, revision 5.0 (opens in a new tab). April 30, 2026: sections 3 (lights and faults), 4 (Wi-Fi), 5.3 (Setup) and 6 (Wi-Fi features); retrieved 2026-10-22.
  5. United Chargers (2025). Grizzl-E Smart Connect User Manual, revision 2.9 (opens in a new tab). units made after July 5, 2023; no printed date (PDF file dated July 25, 2025): sections 7 (lights and faults), 8 (Wi-Fi) and 10 (station Wi-Fi network); retrieved 2026-10-22.