Firmware update failed or stuck: what it means and what to do
A healthy OCPP 1.6 update runs Downloading, Downloaded, Installing, then Installed, with a reboot either before Installed or after it (OCPP 1.6, §5.19). DownloadFailed and InstallationFailed are failures (OCPP 1.6, §7.25).
What it means
Signed updates add states such as InvalidSignature and InstallVerificationFailed (OCPP 2.0.1, FirmwareStatusEnumType, §3.33; Improved security for OCPP 1.6-J, §6.8).
Likely causes
The firmware signing certificate is not valid or has been revoked: the charger answers the update request with InvalidCertificate or RevokedCertificate and does not start (Improved security for OCPP 1.6-J, §4, §6.18).
The firmware signature does not verify, or is missing: status InvalidSignature (OCPP 2.0.1, L01; Improved security for OCPP 1.6-J, §4).
First three checks
1.
No status for a long time? Use TriggerMessage FirmwareStatusNotification (OCPP 1.6, §5.17). Idle means nothing is running (OCPP 1.6, §4.5).
2.
Installed, but no new BootNotification yet? In the manual-reboot sequence the charger reports Installed first and reboots after a Hard Reset (OCPP 1.6, §5.19). Check firmwareVersion in the next BootNotification.
3.
Connectors still Unavailable afterwards? If they were set Unavailable with ChangeAvailability, that status persists across reboots (OCPP 1.6, §4.9, §5.2): set them Operative.
What to do
What to tell the customer
"A software update on your charger didn't complete.
We're checking it and will retry the update at a quiet time."
A detection rule to start from
When the status is DownloadFailed, InstallationFailed, InvalidSignature or InstallVerificationFailed: open a "firmware update failed" ticket and group by model and target version.
Sources
- Open Charge Alliance (2017). Open Charge Point Protocol 1.6, edition 2 (opens in a new tab). §4.5 Firmware Status Notification, §4.9 Status Notification, §5.2 Change Availability, §5.17 Trigger Message, §5.19 Update Firmware, §7.25 FirmwareStatus; accessed 2026-10-22.
- Open Charge Alliance (2026). Improved security for OCPP 1.6-J, edition 4 (opens in a new tab). §4 Secure firmware update (L01), §6.8 FirmwareStatusEnumType, §6.18 UpdateFirmwareStatusEnumType; accessed 2026-10-22.
- Open Charge Alliance (2025). OCPP 2.0.1 Edition 4, Part 2 – Specification (opens in a new tab). L01 Secure Firmware Update; Messages, Datatypes & Enumerations §3.33 FirmwareStatusEnumType; accessed 2026-10-22.
Talk to us about your chargers
- Tell us about your network.
- Meet a Kinethra specialist.
- Get your chargers live on Kinethra.
- 40,000+ chargers onlineOn the Kinethra platform.
- OCPP 1.6 and 2.0.1Kinethra works with OCPP chargers from any manufacturer.
- No commission on charging revenueKinethra takes none.
We use your details to answer your request. See our Privacy Policy for details.