This page is also available in French. Switch to French

This page is also available in Spanish. Switch to Spanish

ResetFailure: what it means and what to do

"Unable to perform a reset" (OCPP 1.6, §7.6). The charger was asked to restart and did not manage it.

What it means

OCPP has two resets.

A Soft reset stops ongoing transactions gracefully, sends StopTransaction for each and restarts the application software. A Hard reset restarts all the hardware without the need to stop transactions gracefully; it is "a last resort" in which queued information might get lost (OCPP 1.6, §5.14, §7.42).

The charger answers Accepted (it will try) or Rejected (it will not) (OCPP 1.6, §7.41). ResetRetries sets the number of times to retry an unsuccessful reset (OCPP 1.6, §9.1.22).

In OCPP 2.0.1

Resets are OnIdle or Immediate, and the answer can also be Scheduled: the station is busy with a process that cannot be interrupted and resets when it finishes (OCPP 2.0.1, B11, §3.75).

Idle means more than no transaction. A firmware update, a log upload, a pending reservation or a cable still locked in the station also keep it from being idle (OCPP 2.0.1, B11). A reset that never seems to happen may be waiting behind one of them.

A reset can target a single EVSE with evseId. ResetRetries moves to the OCPPCommCtrlr component (OCPP 2.0.1, B11; Referenced Components and Variables, §2.1.14).

Likely causes

OCPP does not list causes for ResetFailure.

The detail, if the charger gives any, is in the optional vendorErrorCode and info fields of the StatusNotification (OCPP 1.6, §6.47).

In OCPP 2.0.1, a station that cannot reset at that moment answers Rejected, and so does a station asked to reset a single EVSE when it does not support that (OCPP 2.0.1, B11).

First three checks

  • 1.

    Read the Reset answer: Rejected, Accepted or, in OCPP 2.0.1, Scheduled.

  • 2.

    Look for a BootNotification. A charger sends one each time it boots or reboots (OCPP 1.6, §4.2), so none after an accepted reset means it did not restart.

  • 3.

    In OCPP 2.0.1, look for a firmware update, log upload, reservation or locked cable that keeps the station busy.

What to do

  • Safe remote action

    After a failed Soft reset, one Hard reset if the manufacturer allows it, knowing that queued data is at risk (OCPP 1.6, §5.14).

  • Dispatch when

    The Hard reset also fails. If it is safe to do so, ask the site contact to switch the charger off at its circuit breaker and back on. If that does not help, contact the charger manufacturer.

  • Do not

    Do not loop resets, and never automate them. A charger that keeps failing to reset needs the manufacturer's support.

What to tell the customer

"Your charger didn't restart when we asked it to.

If it's safe to reach, you can switch it off at its circuit breaker and back on. If that doesn't help, we'll take it up with the manufacturer."

A detection rule to start from

On ResetFailure, or an accepted Reset that is not followed by a BootNotification within the time the model normally takes to boot: send one Hard reset if the manufacturer allows it; if that fails too, open a ticket for a site power cycle and the manufacturer.

Sources

  1. Open Charge Alliance (2017). Open Charge Point Protocol 1.6, edition 2 (opens in a new tab). §4.2 Boot Notification, §5.14 Reset, §6.47 StatusNotification.req, §7.6 ChargePointErrorCode, §7.41 ResetStatus, §7.42 ResetType, §9.1.22 ResetRetries; accessed 2026-10-22.
  2. Open Charge Alliance (2025). OCPP 2.0.1 Edition 4, Part 2 – Specification (opens in a new tab). B11 Reset - Without Ongoing Transaction (incl. B11.FR.06, B11.FR.09), §3.75 ResetStatusEnumType, Referenced Components and Variables §2.1.14 ResetRetries; accessed 2026-10-22.

Talk to us about your chargers

What happens next

  1. Tell us about your network.
  2. Meet a Kinethra specialist.
  3. Get your chargers live on Kinethra.
  • 40,000+ chargers onlineOn the Kinethra platform.
  • OCPP 1.6 and 2.0.1Kinethra works with OCPP chargers from any manufacturer.
  • No commission on charging revenueKinethra takes none.
  1. 01Contact
  2. 02Business
  3. 03Request

Step 1 of 3

We use your details to answer your request. See our Privacy Policy for details.