This page is also available in French. Switch to French

This page is also available in Spanish. Switch to Spanish

WeakSignal: what it means and what to do

"Wireless communication device reports a weak signal" (OCPP 1.6, §7.6). Unless the status is Faulted, it is a warning and charging is still possible (OCPP 1.6, §4.9).

What it means

OCPP 1.6 has no measurand for signal strength (OCPP 1.6, §7.31).

Any detail is up to the vendor: StatusNotification has an optional free-text info field and an optional vendorErrorCode, each up to 50 characters (OCPP 1.6, §6.47).

On its own, WeakSignal changes nothing for the driver. It matters when it comes with heartbeat gaps, repeated reconnects or session data that arrives late.

In OCPP 2.0.1

The DataLink component carries SignalStrength, Fallback ("Using Backup SIM/Network Preference") and Problem ("Communications module or link connection fault") (OCPP 2.0.1 Appendices, §3.2.22).

If the station supports monitoring on that variable, a management system can set a threshold monitor on SignalStrength with SetVariableMonitoring, and the station then sends a NotifyEvent when the threshold is crossed (OCPP 2.0.1, N04, N07).

DataLink also reports the IMSI and ICCID of the SIM (OCPP 2.0.1 Appendices, §3.2.22). In OCPP 1.6 they can come in BootNotification (OCPP 1.6, §4.2). Have them ready when you call the carrier.

Likely causes

OCPP does not list causes: the code only says the wireless device reports a weak signal (OCPP 1.6, §7.6).

For Wi-Fi, the signal where the charger stands may be below what the manufacturer requires. One manufacturer's connection guide asks for a 2.4 GHz network and a signal of −67 dBm or better where the charger is located (see Sources).

First three checks

  • 1.

    Do the WeakSignal reports line up with heartbeat gaps or reconnects? If not, log and watch.

  • 2.

    Is there a time-of-day pattern in the reports?

  • 3.

    For Wi-Fi, check the signal where the charger is located, not at the router, against the manufacturer's minimum.

What to do

  • Safe remote action

    No command fixes a radio. TriggerMessage with Heartbeat or StatusNotification confirms the charger still answers and changes nothing (OCPP 1.6, §5.17).

  • Dispatch when

    WeakSignal is chronic and comes with offline periods or lost sessions. Ask the charger manufacturer which network options the model supports.

  • Do not

    Do not reset a charger for a weak signal.

What to tell the customer

"Your charger's wireless signal is weak, which can make it drop offline.

If it uses your Wi-Fi, moving the router closer to the charger or adding a Wi-Fi extender can help."

A detection rule to start from

WeakSignal reported on several days in one week, plus at least one offline gap in the same week: open a site connectivity ticket and attach the SIM identifiers.

Sources

  1. Open Charge Alliance (2017). Open Charge Point Protocol 1.6, edition 2 (opens in a new tab). §4.2 Boot Notification, §4.9 Status Notification, §5.17 Trigger Message, §6.47 StatusNotification.req, §7.6 ChargePointErrorCode, §7.31 Measurand; accessed 2026-10-22.
  2. Open Charge Alliance (2025). OCPP 2.0.1 Edition 4, Part 2 – Specification (opens in a new tab). N04 Set Variable Monitoring, N07 Alert Event; accessed 2026-10-22.
  3. Open Charge Alliance (2025). OCPP 2.0.1 Part 2 – Appendices, v1.5 (opens in a new tab). §3.2.22 DataLink; accessed 2026-10-22.
  4. United Chargers (2026). Grizzl-E Smart Connection Guide (opens in a new tab). Wi-Fi requirements (2.4 GHz, −67 dBm or better where the charger is located) and ways to improve the signal; undated web page, accessed 2026-10-22.

Talk to us about your chargers

What happens next

  1. Tell us about your network.
  2. Meet a Kinethra specialist.
  3. Get your chargers live on Kinethra.
  • 40,000+ chargers onlineOn the Kinethra platform.
  • OCPP 1.6 and 2.0.1Kinethra works with OCPP chargers from any manufacturer.
  • No commission on charging revenueKinethra takes none.
  1. 01Contact
  2. 02Business
  3. 03Request

Step 1 of 3

We use your details to answer your request. See our Privacy Policy for details.