Once a condo or apartment building has shared chargers, the board has to decide how residents pay. There are four basic options: per kWh, per hour, a flat fee, or free. The right one depends on three things: whether the price is fair between light and heavy users, whether it covers the building’s costs, and what the metering rules in your state or province allow.
That last point is the one boards tend to miss. Selling electricity by the kilowatt-hour turns the charger into a measuring device, and measuring devices used for trade have their own rules. This guide explains each option, the rules behind it in the US and Canada, and a simple way to set a price.
This guide describes published rules. It is not legal advice. Check with your state or provincial authority, and your lawyer, before you set prices.
The four options at a glance
| Option | How residents pay | Fair between users? | Metering rules to check |
|---|---|---|---|
| Per kWh | For the energy delivered | Yes: you pay for what you use | US: NIST Handbook 44 §3.40 where your state has adopted it. Canada: Measurement Canada dispensation |
| Per hour | For time plugged in or charging | Partly: a slower car pays more for the same energy | US: may conflict with kWh method-of-sale rules where adopted. Canada: currently exempt |
| Flat fee | A monthly fee, or included in fees or rent | No: light users subsidize heavy users | US: monthly fee generally outside device rules; per-session fee, same check as per hour. Canada: currently exempt |
| Free | Nothing at the charger | No: everyone pays through common costs | Must be clearly shown as free where kWh rules apply |
Per kWh: the fairest option, with the most rules
Paying per kWh is like paying for fuel by the litre or gallon. A resident who charges 10 kWh pays for 10 kWh.
United States. The National Institute of Standards and Technology (NIST) publishes model weights-and-measures rules that states adopt into their own law. NIST describes its handbooks as “model laws and regulations for state adoption,” so what applies to you depends on your state. Two documents matter:
- Handbook 130, method of sale. Electricity “sold at retail as a vehicle fuel shall be in units in terms of the kilowatt-hour (kWh).” Other fees may be added, and “such fees may be based on time measurement and/or a fixed fee” (HB 130 §2.33.2, 2026).
- Handbook 44, Section 3.40. The device code for EV chargers, permanent since 1 January 2023. For AC chargers the accuracy tolerances are 1.0% at acceptance and 2.0% in service. At the end of every transaction a receipt, printed or electronic, must show the energy delivered, the unit price, the total, any separate time-based charges, the charger ID and the business name, among other items (S.2.6).
California enforces Handbook 44 Section 3.40. Its Division of Measurement Standards says that since 1 January 2023, “all new installations of both alternating current (AC) and direct current (DC) EVFS/EVSE used for commercial purposes” must meet state requirements, which adopt Handbook 44 Section 3.40 (CDFA FAQ, rev. 10/2025). Other states differ. Ask your state weights-and-measures office whether it has adopted Section 3.40 and the Handbook 130 rule.
Canada. Billing by energy falls under the Electricity and Gas Inspection Act, and Measurement Canada runs a temporary dispensation so owners can bill per kWh with chargers already in the market. For chargers reserved for residents, the relevant one is the non-commercial dispensation, which covers “owners and renters living in multi-unit residential buildings.” Chargers open to the general public fall under the commercial dispensation. For both:
- the charger must be put into service before 1 January 2028;
- the owner must apply by 31 December 2027;
- from 1 January 2030, every Level 1 and Level 2 charger in service must be approved and verified, or removed from service.
To use it, the owner files a list of chargers, a signed declaration and an indemnity with Measurement Canada. Each charger needs a placard, accuracy within ±3% with evidence such as a manufacturer’s letter, a way to show and invoice the transaction, and a complaint process.
If you plan per-kWh billing, ask your hardware supplier, in writing, about the approval status of the exact charger model.
Per kWh plus fees
Many buildings that bill per kWh add an idle fee. An idle fee, charged per minute after a grace period once charging ends, keeps cars from blocking a charger they no longer need. NIST’s model rule allows such fees on top of the kWh price. It requires them to be displayed (HB 130 §2.33.3(d)) and shown separately on the receipt, with start and end times and unit price (HB 44 S.2.6(e)).
Per hour: simple, but check the rules
Hourly pricing is easy to explain, and it needs no energy measurement. It has two weaknesses. First, cars charge at different speeds, so two residents can pay the same for very different amounts of energy. Second, in the US, the Handbook 130 rule above says retail electricity sold as vehicle fuel is priced in kWh, with time-based fees described as additional. Where a state has adopted that rule, hourly-only pricing may not be allowed. Check before you choose it.
In Canada, the picture is different for now. Measurement Canada says that “the use of a flat fee or time-based billing method for EV charging is exempt from the EGIA and other statutes at this moment,” and that “the method of billing must be transparent and clearly indicated to the customer at the time of the EV charge.”
Flat fee: easy to run, hard to keep fair
A monthly fee, or charging included in condo fees or rent, does not depend on use, so Handbook 44 Section 3.40 does not apply: the code excludes chargers used where “the amount dispensed does not affect customer charges or compensation” (A.2(b)). A flat fee per charging session is different: where a state has adopted the Handbook 130 rule, it raises the same question as hourly-only pricing. Check before you choose it. In Canada, flat-fee billing is currently exempt, as quoted above.
The downside is fairness. A resident who drives 5,000 km a year pays the same as one who drives 30,000. As more residents switch to EVs, that gap tends to become a board-meeting topic.
Free: an amenity with a cost
Free charging works for small buildings with light use, or as a short-term perk. Where the NIST labelling rule applies, a charger offering free or unlimited energy must say so “in place of the unit price” (HB 130 §2.33.3(a)). The electricity is still paid for, out of common costs.
Are you reselling electricity?
In many places, only a regulated utility may sell electricity. Most US states have addressed this for EV charging. NIST SP 2200-03 (August 2023) counts forty-five states that had expressly excluded public charging site owners and hosts from the definition of “public utility.”
The wording varies by state. California’s Public Utilities Code §216(i), for example, covers a facility “that supplies electricity to the public only for use to charge light duty plug-in electric vehicles.” A condo garage that sells only to residents may or may not count as “the public” under your state’s law. Ask a local lawyer. Ask your accountant about sales tax too.
In Canada, whether a building may resell electricity depends on provincial utility law; ask a local lawyer.
Setting the price: a simple method
The numbers below are illustrative. Replace them with your own.
- Energy. Start with what your building pays per kWh, including any demand charges. Say $0.25.
- Equipment. Spread the cost of chargers and installation over their expected life and expected use. If each charger cost $6,000 installed, lasts 10 years and delivers 3,000 kWh a year, that is $0.20 per kWh.
- Running costs. Add software, payment processing and a maintenance reserve, from your actual quotes.
- Result. In this example, about $0.45 per kWh plus running costs covers the building.
If your utility has time-of-use rates, a lower overnight price can move charging off-peak and lower the building’s bill. Review the price once a year, and whenever the utility tariff changes.
Choosing software for resident billing
Whatever you choose, the software has to express it. Our Connect Business software supports:
- fixed rates per kWh, per hour, or nothing;
- time-of-use rates by time of day and day of week;
- tiered rates that change during a session by energy delivered or charging time;
- a security deposit, an activation fee, an idle fee with a free grace period and a per-minute price, and a reservation fee;
- different prices for different driver groups, for example residents and visitors;
- a receipt for every charging session (whether a receipt meets your state’s content rules is for your weights-and-measures office);
- payment exports to CSV for the board’s accounts.
Kinethra charges drivers no fees on top of the price the station owner sets. Connect Business works with OCPP 1.6 and 2.0.1 chargers from any manufacturer. Software does not make a meter approved for trade, though. That depends on the charger hardware and your local rules.
Checklist for the board
- Decide what you want the price to do: recover costs, keep chargers free for the next car, or both.
- Ask your weights-and-measures authority (US) or check Measurement Canada’s dispensation (Canada) before you choose per-kWh or per-hour pricing.
- US: get the charger model’s approval status in writing. Canada: file for the dispensation yourself, and get the manufacturer’s accuracy letter.
- Ask a lawyer whether selling charging to residents is allowed under your state’s utility law.
- Build a cost-based price, and set a date to review it.
- Make sure every resident gets a receipt, and that fees are shown before charging starts.
Setting up billing for your building?
If your board is choosing a pricing model or the software to run it, book a business demo, and we will set up your actual tariff with you.
Sources
- NIST, Handbook 130 (2026), IV.B §2.33 (opens in a new tab) ()
- NIST, Handbook 44 (2026), Section 3.40 (opens in a new tab) ()
- NIST, EVSE Program (opens in a new tab) ()
- NIST, SP 2200-03, Aug 2023 (opens in a new tab) ()
- CDFA, EVSE RSA FAQ, Oct 2025 (opens in a new tab) ()
- California Legislature, PUC §216(i) (opens in a new tab) ()
- Measurement Canada, EV charging stations, 30 Oct 2022 (opens in a new tab) ()
- Measurement Canada, commercial dispensation, 16 Sep 2025 (opens in a new tab) ()
- Measurement Canada, non-commercial dispensation, 16 Sep 2025 (opens in a new tab) ()
