What is smart charging?
Smart charging lets a management system influence how fast a car charges, or how much a whole charger or group of chargers may draw, for example because of the grid supply, the energy available or the wiring of a building (OCPP 1.6, §3.13).
Charging profiles
The limits travel in charging profiles: schedules of time intervals, each with a maximum charging limit.
A limit in amps is the current per phase, not the sum of all phases (OCPP 1.6, §3.13.1, §7.12, §7.14).
Three kinds of profile in OCPP 1.6
ChargePointMaxProfile
Limits the whole charger: all its connectors combined. It can only be set on connector 0 (OCPP 1.6, §3.13.1, §3.13.3).
TxDefaultProfile
The default for new transactions, for example a rule that prevents charging during the day. On connector 0 it applies to every connector (OCPP 1.6, §3.13.1).
TxProfile
For the current transaction only. It overrules the default while the transaction lasts and should be deleted afterwards; with no transaction running, the charger discards it (OCPP 1.6, §3.13.1).
Stack levels
Profiles of the same kind can be stacked to describe calendars, such as full rate on weeknights and weekends with exceptions for holidays.
At any moment the valid profile with the highest stackLevel wins (OCPP 1.6, §3.13.2).
Two pitfalls from the specification. A profile on the highest level without a duration means the charger never falls back to a lower level. And a replacement profile whose validFrom is in the future sends the charger back to default behaviour until that time, so the specification recommends a start time in the past (OCPP 1.6, §3.13.2).
The composite schedule
The charger combines the profiles that apply by taking the lowest limit in each time interval.
The result is the composite schedule (OCPP 1.6, §3.13.3). GetCompositeSchedule asks a charger for the schedule it will actually follow (OCPP 1.6, §5.7).
Before relying on smart charging, read the charger's limits, such as ChargeProfileMaxStackLevel, ChargingScheduleMaxPeriods and MaxChargingProfilesInstalled (OCPP 1.6, §3.13.5).
When the charger goes offline
A charger that goes offline during a transaction keeps using the TxProfile it has.
Before a transaction, it uses the ChargePointMaxProfile and TxDefaultProfile it already has. A charger with no profiles at all charges as if no limits apply (OCPP 1.6, §3.13.6).
So a limit that must also hold when a charger goes offline before a transaction starts has to be on the charger already, in a ChargePointMaxProfile or TxDefaultProfile (OCPP 1.6, §3.13.6).
In OCPP 2.0.1
Smart charging is extended with direct input from an energy management system, local controllers, and input from the car over ISO 15118 (OCPP 2.0.1 Part 0, §2.4).
ChargePointMaxProfile is called ChargingStationMaxProfile, and a fourth profile purpose, ChargingStationExternalConstraints, carries limits from outside that the station includes in its local schedule (OCPP 2.0.1, §3.13). The use cases are in functional block K, from SetChargingProfile to renegotiation with the car (OCPP 2.0.1, K01–K17).
How it works in Kinethra
Kinethra supports smart charging based on grid signals, and integrates with utility systems through open standards, including OpenADR.
In the Connect app, drivers can schedule charging for night-time or cheaper electricity rates.
Sources
- Open Charge Alliance (2017). Open Charge Point Protocol 1.6, edition 2 (opens in a new tab). §3.13 Smart Charging (incl. §3.13.6 Offline behavior), §5.7 Get Composite Schedule, §7.12 ChargingRateUnitType, §7.14 ChargingSchedulePeriod; accessed 2026-10-22.
- Open Charge Alliance (2025). OCPP 2.0.1 Edition 4, Part 0 – Introduction (opens in a new tab). §2.4 Extended Smart Charging; accessed 2026-10-21.
- Open Charge Alliance (2025). OCPP 2.0.1 Edition 4, Part 2 – Specification (opens in a new tab). §3.13 ChargingProfilePurposeEnumType; functional block K; accessed 2026-10-21.
Talk to us about your chargers
- Tell us about your network.
- Meet a Kinethra specialist.
- Get your chargers live on Kinethra.
- 40,000+ chargers onlineOn the Kinethra platform.
- OCPP 1.6 and 2.0.1Kinethra works with OCPP chargers from any manufacturer.
- No commission on charging revenueKinethra takes none.
We use your details to answer your request. See our Privacy Policy for details.