Status as of 22 October 2026. This is not legal advice.
New York’s utility Make-Ready program stopped taking new Level 2 applications this year, and the regulator pointed to missing data. Under the new rules, a charging network that does not report at least 90% of the required monthly data cannot be part of new applications when the DC fast charging part reopens. For Level 2 owners who already received funds, the data your charging software sends decides whether you stay in good standing for five years, or face claw-backs.
Here is what the New York Public Service Commission (PSC) decided, what the 90% rule measures, and what to ask your network provider. The main state Level 2 rebate still open is NYSERDA’s Charge Ready NY 2.0.
What happened
Six New York utilities, working together as the Joint Utilities, have run the EV Make-Ready Program since 2020. It paid incentives toward the electrical infrastructure behind chargers.
In March 2026, the PSC denied the utilities’ request to keep funding more plugs. Its June order, the Order Providing Clarification on Make-Ready Program (Case 18-E-0138, issued and effective 12 June 2026), sums up the March decision: the Commission “found that there was insufficient session and outage data to make an informed decision on whether funding additional L2 chargers is a prudent investment.” Because of the lack of data, and because the Level 2 plug targets were nearly reached, it closed the Level 2 part of the program. It paused the DC fast charging part until the utilities collect at least 90% of the required data.
The Joint Utilities’ program page now says that as of 21 April 2026 they “will no longer accept new applications” for the Make-Ready Programs. Applications submitted before the deadline are still being reviewed. As of 22 October 2026 the DC fast charging part has not reopened; the eligible-provider list it needs is still being developed.
The 90% rule, in plain terms
The June order explains how the threshold works:
- Who it applies to. Network service providers (the companies whose software runs the chargers), participants (site owners and developers) and approved contractors must each meet the 90% threshold to be part of new applications.
- What is counted. Each charging station, for each month, has five data types: outages or uptime data, session durations, charging durations, energy delivered per session, and peak demand per session.
- How it is measured. Data points reported divided by data points required, across all of a provider’s Make-Ready chargers in the state. A data point counts if it was reported directly, confirmed by written attestation, or, for peak demand, estimated with an approved proxy method. The order gives a worked example: three stations over 27 months need 405 data points; 387 reported gives 95.6%.
- Quiet months still count. If a charger had no sessions and no outages in a month, a written confirmation that it stayed in service and could send data fills the gap.
- Falling below has a cost. A provider below 90% goes on “ineligible administrative status” and, after it recovers, waits another 90 days before it can join new applications.
- The list decides. The utilities must publish a list of eligible providers, and “developers, site owners, and site operators may only submit applications with an eligible NSP.” As of 22 October 2026, the Joint Utilities’ page says this Eligible Network List is still being developed.
- Money waits for data. The utilities withhold the final incentive payment until the first month of data has been submitted for each installed charger.
If you already have Make-Ready chargers
Closing the program to new applications does not end your duties. The order says the Make-Ready Order “requires Participants to maintain operational chargers and report data for at least five years,” and that ending new Level 2 applications “does not alter or reduce the ongoing data reporting obligations.” The Commission also directed the utilities to create a cure pathway so participants who fall below 90% can catch up; it does not reduce the total months of data required.
The order recalls that, under the original program, penalties for missing data could include disqualification from further incentives, claw-back of payments received, or revoking service so another market participant can run the station.
What is still available: Charge Ready NY 2.0
Level 2 funding in New York now runs through NYSERDA, the state energy agency. According to NYSERDA’s program page, Charge Ready NY 2.0 offers $3,000 per charging port at workplaces, multifamily properties and hotels, $1,000 more per port in disadvantaged communities, but only $1,000 per port for spaces assigned to an individual driver, which is common in condo garages. A multifamily site needs at least ten dwelling units on site. Chargers must come from NYSERDA’s list of eligible charging equipment and networks. NYSERDA’s Implementation Manual says applications are accepted first-come, first-served until 31 December 2026, or until the program runs out of funds.
Check the current status with NYSERDA before you plan around it.
Why data now decides incentives
The order states its purpose plainly: “Obtaining comprehensive program data is critical to advancing the consideration of a potential future Make-Ready Program.” Any future New York program is likely to look at how well networks reported in this one. Our reading is that a cheap network that reports poorly is now a risk to your incentives, not only to your operations.
For a property owner, that changes the questions you ask when you choose software.
Questions to ask your network provider
- What share of the required monthly data did you report for New York Make-Ready chargers since January 2024?
- Do you report all five data types for each charger: outages or uptime, session duration, charging duration, energy and peak demand? Ask whether peak demand is measured or estimated.
- Will you be on the Joint Utilities’ Eligible Network List when it is published? What happens to my applications if you are not?
- Who prepares the written confirmations for months with no sessions?
- Can I export my session data myself, in a format my utility accepts?
- If I switch provider, do I keep my data history, and can my chargers move without new hardware?
Where Kinethra fits
We are not commenting here on any provider’s eligibility in New York. What we can say about our software:
- Connect Business works with OCPP 1.6 and 2.0.1 chargers from any manufacturer, and chargers move to Connect Business without replacing OCPP chargers.
- Each session record shows the connector, energy, duration, power, average current and stop reason, among other fields.
- A timeline logs every charger event, including going online or offline, sessions, status changes, errors and firmware.
- Sessions export to CSV, and customers’ data belongs to the customers.
What to do now
- Have Make-Ready chargers? Ask your provider for its data reporting share and check that each charger is still sending data.
- Planning Level 2 in 2026? Check Charge Ready NY 2.0 now; the deadline is 31 December 2026, or earlier if funds run out.
- Choosing software? Put the six questions above in writing.
If you are reviewing your charging software in New York, book a business demo, and we will go through your chargers, your data and your options with you.
Sources
- NY PSC, Case 18-E-0138, 12 Jun 2026 (opens in a new tab) ()
- Joint Utilities of New York, Make-Ready overview (opens in a new tab) ()
- Joint Utilities of New York, Eligible Network List (opens in a new tab) ()
- NYSERDA, Charge Ready NY 2.0 (opens in a new tab) ()
- NYSERDA, How the Charge Ready NY 2.0 Rebate Works (opens in a new tab) ()
- NYSERDA, PON 5367 Implementation Manual, 26 Mar 2026 (opens in a new tab) ()
